NAA665

MB QUART 390 Watt 6-Channel Marine Amplifier

Features

  • 6 x 65 watts CEA rated marine amplifier
  • Extruded heat sink
  • End panel mounted connections and controls
  • 2, 4 or 6 channel inputs to feed all outputs
  • Gain controlled by switch instead of potentiometer
  • Three settings - low, medium and high
  • Default setting at factory at medium
  • Easily accessible mounting tabs
  • Matte black powder coated heat sink
  • Smash wire connectors with #2 Phillips head screw instead of Allen head
  • 4 AWG power and ground

Crossovers controlled by switch grouped as follows

Channels 1 & 2

  • HP fixed at 100HZ at 12db per octave with 15HZ subsonic
  • LP/BP fixed at 15HZ to 100HZ at 18db per octave
  • AP with fixed subsonic filter - not selectable

Channels 3 & 4

  • Bridging capability
  • HP fixed at 100HZ at 12db per octave with 15HZ subsonic
  • LP/BP fixed at 15HZ to 100HZ at 18db per octave
  • AP with fixed subsonic filter - not selectable

Channels 5 & 6

  • Bridging capability
  • HP fixed at 100HZ at 12db per octave with 15HZ subsonic
  • LP/BP fixed at 15HZ to 100HZ at 18db per octave
  • AP with fixed subsonic filter - not selectable


All speaker and power connections located on one end of amplifier. Power and ground inputs can take up to four gauge wire.


All controls are done through simple switches instead of complicated potentiometers. This greatly reduces the possibility of installation error and damaged speakers.

Specifications

16.9"L x 7.7"W x 1.9"H
Available Downloads
TitleSizeTypeUpdated
NAA66569.31 KBProduct Literature09/21/2006